1. Fix the material to be cut on the work surface of the laser cutting machine.

　　2. The 50w co2 laser engraving and cutting machine factory adjusts the equipment parameters accordingly according to the material and thickness of the metal sheet.

　　3. Select the appropriate lenses and nozzles, and check them before starting the machine to check their integrity and cleanliness.

　　4. The 50w co2 laser engraving and cutting machine factory adjusts the cutting head to the appropriate focus position according to the cutting thickness and cutting requirements.

　　5. Select the appropriate cutting gas and check whether the gas ejection state is good.

　　6. Try to cut the material. After the material is cut, check the verticality, roughness of the cut surface and whether there is burr or slag.

　　7. The 50w co2 laser engraving and cutting machine factory analyzes the cutting surface, and adjusts the cutting parameters accordingly until the cutting process of the sample meets the standard.

　　8. The 50w co2 laser engraving and cutting machine factory carries out the programming of the workpiece drawings and the layout of the whole board cutting, and imports the cutting software system.

　　9. Adjust the cutting head and focus distance, prepare auxiliary gas, and start cutting.

　　10. The 50w co2 laser engraving and cutting machine factory conducts process inspections on the samples, and adjusts the parameters in time if there are any problems until the cutting meets the process requirements.