6090 laser cutter factory Laser cutting is a non-contact processing method with high energy and good density controllability. There are four main cutting methods.

　　6090 laser cutter factory melting cutting

　　6090 laser cutter factory In the laser melting cutting, the workpiece is partially melted and the melted material is sprayed out with the help of airflow. Because the transfer of the material occurs only in its liquid state, the process is called laser melting cutting. During laser melting and cutting, the material is heated to a certain temperature to melt, and the non-oxidizing gas is sprayed through a nozzle coaxial with the beam, and the liquid metal is discharged by the pressure of the gas to form a cut.

　　6090 laser cutter factory Vaporization Cutting

　　6090 laser cutter factory In the process of laser vaporization cutting, a high-energy and high-density laser beam is used to heat the workpiece, so that the temperature rises, and the material is vaporized into steam in a very short time. A cut is formed in the material, thus achieving the cutting effect.

　　In order to prevent material vapor from condensing on the slit wall, the thickness of the material should not exceed the diameter of the laser beam. This process is therefore only suitable for applications where the exclusion of molten material must be avoided. The materials used for laser vaporization cutting generally include extremely thin metal materials and non-metallic materials. In the case of a certain thickness of the plate, the maximum cutting speed is inversely proportional to the gasification temperature of the material.