In terms of processing principle, engraving is a combination of drilling and milling, and the engraving machine has various data input modes as needed. There are two types of computer engraving machines: laser engraving and mechanical engraving, both of which have high power and low power. So do you know about its engraving failure and output failure? The customized 4060 mini engraving machine editor will bring you a brief understanding.
1. Engraving failure
1. Whether the screws of each part are loose.
2. Check whether the path processed by yourself is correct.
3. Whether the file is too large to cause computer processing errors.
4. Increase or decrease the spindle speed to adapt to different materials.
5. Unscrew the knife chuck, turn the knife in one direction to clamp, and put the knife in the right direction to avoid the engraved object being unclean.
6. Check whether the tool is damaged, replace it with a new one, and re-engraving.

2. Output failure
1. No output, please check whether the computer and the control box are connected well.
2. Open the settings of the engraving manager to check whether the space is full, and delete the unused files in the manager.
3. Whether the wiring of the signal line is loose, carefully check whether each line is connected.
The above is the small series of customized 4060 mini engraving machine: little knowledge about the fault analysis of the engraving machine.