6090 laser cutter machine fusion cutting

　　In laser melting cutting, the workpiece is partially melted and then the melted material is ejected by means of an air flow. Because the transfer of the material occurs only in its liquid state, the process is called laser melting cutting.

　　6090 laser cutter machine vaporization cutting

　　During the vaporization cutting process of the 6090 laser cutter machine, a high-energy and high-density laser beam is used to heat the workpiece, so that the temperature rises, and the material is vaporized into steam in a very short time. An incision is formed on the upper part, so that the cutting effect is achieved.

　　6090 laser cutter machine oxidation melting cutting

　　Fusion cutting generally uses inert gas. If oxygen or other active gas is used instead, the material will be ignited under the irradiation of the laser beam, and a violent chemical reaction with oxygen will generate another heat source to further heat the material, which is called oxidative melting cutting. .

　　6090 laser cutter machine controlled fracture cutting

　　For brittle materials that are easily damaged by heat, high-speed and controllable cutting by laser beam heating is called controlled fracture cutting. The main content of this cutting process is that the laser beam heats a small area of ​​brittle material, causing large thermal gradients and severe mechanical deformation in this area, resulting in the formation of cracks in the material.