For beginners of optical fiber 6090 laser cutter, it will be difficult when the cutting quality is not good, and they do not know how to adjust in the face of many parameters. The following 6090 laser cutter manufacturers briefly introduce the problems and solutions encountered.

　　The parameters that affect the cutting quality of the 6090 laser cutter are: cutting height, cutting nozzle type, focus position, cutting power, cutting frequency, cutting duty cycle, cutting air pressure and cutting speed. The hardware conditions are: protective lens, gas purity, sheet quality, focusing lens and collimating lens.

　　When the quality of the fiber 6090 laser cutter is poor, it is recommended to perform a general inspection first. The main contents and order of general inspection are:

　　1. 6090 laser cutter cutting height. Calibration is required if the actual cut height is not accurate.

　　2. Check for the wrong type and size of cut. If correct, check the cut for damage and roundness.

　　3. It is recommended to use a cut with a diameter of 1.0 for optical center detection.

　　4. Protective lens Check whether the protective lens is clean, free of water, oil and residue. Sometimes the goggles fog up due to weather or cold air during paving.

　　5. Focus Check that the focus is set correctly. If the cutting head is automatically focused, be sure to use the mobile APP to check whether the focus is correct.

　　6. Modify cutting parameters for 6090 laser cutter.