The 4060 mini engraving machine needs maintenance to prolong its service life, especially in winter, the cold weather will make the engraving machine prone to failure, so how to maintain the 4060 mini engraving machine in winter?

　　The unique water cooling system of the 4060 mini engraving machine optimizes the performance of the engraving machine, but also destines its own limitations. Generally, the suitable temperature for engraving is between 0-45 degrees. When it is lower than 0 degrees Celsius, the tap water used for cooling will freeze, which will inevitably affect the use of the engraving machine.

　　Moreover, the relative humidity used by the 4060 mini engraving machine ranges from 30% to 75%. Too dry and too humid environments are not conducive to the control of the engraving machine and the performance of the power system. The relatively dry environment in winter is also not conducive to the normal use of the engraving machine.

　　Therefore, in winter, you should pay attention to the warmth of the 4060 mini engraving machine. The residual water in the aqueduct today should be removed in time to avoid affecting the water circulation after freezing the next day; the water pump should be taken out of the water tank or bucket with water in time to avoid freezing in the water. Second, pay attention to the maintenance of dryness and humidity in the workshop. If it is too dry, you can increase the number of mopping times to maintain the appropriate humidity in the workshop. It is recommended that in winter, the machine should not be placed outdoors, and the machine should be moved to the workshop.