Wholesale laser cutting machine 100w is a device that uses laser to cut metal or non-metallic components. It has the advantages of fast processing speed, high accuracy and stable performance. However, the quality of the workpiece surface after processing is often not high, then we How to improve this problem? Let's take a look at it together.
1. Check the wear of the conductive block of the Wholesale laser cutting machine 100w. After 50-80 hours of processing, the high-speed wire cutting machine must consider changing the cutting position of the conductive block or replace the conductive block. When it is dirty, it needs to be cleaned with washing liquid. It should be noted that when changing the position of the conductive block or replacing the conductive block, the verticality of the electrode wire needs to be re-corrected to ensure the accuracy and surface quality of the workpiece.

2. Check the rotation of the guide wheel of Wholesale laser cutting machine 100w. If the rotation is not good, it should be replaced. It is also necessary to carefully check the damage and contamination of the upper and lower nozzles. , Wholesale laser cutting machine 100w should also frequently check the condition of the wire in the wire storage drum. If the wire loss is too large, the machining accuracy and surface quality will be affected, and it needs to be replaced in time. In addition, the poor condition of the conductive block, guide wheel and upper and lower nozzles will also cause the vibration of the wire electrode. At this time, even if the machined surface can be discharged well, the machined surface is prone to wave crests or streaks due to the vibration of the wire electrode. As a result, the roughness of the workpiece surface is deteriorated.