The reason why the 50w co2 laser engraving and cutting machine is widely respected in the metal processing industry is mainly due to its high production efficiency and advantages in labor costs. However, there are also many customers who find that the production efficiency has not improved much after using it for a period of time. What is the reason for this? The following will tell you the reasons for the low production efficiency of the 50w co2 laser engraving and cutting machine.

　　1. No automatic cutting process

　　The 50w co2 laser engraving and cutting machine has no automatic cutting process and cutting parameter database on the system. The cutting operator can only perform drawing and cutting manually by virtue of experience. Automatic perforation and automatic cutting cannot be achieved during cutting, and manual adjustment is required. In the long run, the efficiency of the fiber laser cutting machine is naturally very low.

　　2. The cutting method of 50w co2 laser engraving and cutting machine is not suitable

　　The 50w co2 laser engraving and cutting machine does not use common edge, borrow edge, bridge and other cutting methods when cutting metal sheets.

　　3. The nesting software is not used

　　The nesting software is not used during typesetting and cutting, but manual typesetting is performed in the system, and the parts are cut in sequence according to the cutting order of the parts.

　　4. The cutting power does not match the actual cutting thickness

　　The corresponding 50w co2 laser engraving and cutting machine is not selected according to the actual cutting.